• Using the Personal LaserWriter NT With System 7 and System 6 •
All the software on this disk (except the software in the Other Folder) was designed for System 7. However, it works with both System 7 and System 6. If you have System 7 on your Macintosh, you must use either the printer software on this disk, or the printer software that came with System 7. Earlier versions may not be compatible with System 7. (Don’t use the software in the Other Folder.)
If you have System 6 on your Macintosh, your Personal LaserWriter NT will work best with the printer software designed for System 7. However, you can also use earlier versions of this software, including the files in the Other Folder. Follow the instructions in the Personal LaserWriter NT Owner’s Guide for installing printer software onto your Macintosh.
• Cleaning Page Procedure •
After you install a new toner cartridge, you must perform a simple cleaning procedure. To do this, you print a document named Cleaning Page. You'll find the Cleaning Page on this disk. (You may have already copied it to your hard disk.)
Follow these steps:
1. Click the document named Cleaning Page to select it.
2. Choose Print from the File Menu.
3. In the Print dialog box that appears, click OK.
4. Remove the page you just printed and place it face up in the multipurpose tray.
(You're going to print on the other side of this page.)
5. Select the Cleaning Page again, then choose Print from the File Menu.
6. In the Print dialog box, click Manual Feed, then click OK.